Our pick-up MC Scheu Kupfer L (Low) is made at Benz Micro in Switzerland. Each pick-up is hand-made, individually measured out and audio tested. The original of the testing protocol is supplied along with the system.
Technical Specifications
| System type: | Moving Coil |
| Cantilever: | Solid boron rod: 0.28 mm diameter |
| Stylus: | Nude line-contact diamond, mirror polished |
| Stylus tip radius: | 3 x 60 μm |
| Vertical tracking angle (VTA): | 20 degrees |
| Coil: | Pure iron cross |
| Weight: | 6,8 gr |
Electrical
| Output voltage: | ca. 0.4 mV @ 3.54 cm/s |
| Internal impedance: | ca. 12 ohms |
| Frequency response: | 20Hz – 20kHz +/- 1 dB |
| Channel balance: | < 0.5dB Channel separation: > 35dB @ 1 kHz |
Since 1995 we have been marketing our own styluses with ever-increasing success. Our pick-up MC Scheu Kupfer L (Low) is made at Benz Micro in Switzerland. Each pick-up is hand-made, individually measured out and audio tested. The original of the testing protocol is supplied along with the system.
The standard version of MC Scheu Kupfer L is based on the successful Benz Micro Glider S series. This low-output pick-up is equipped with a Namiki micro-ridge diamond stylus tip. We are convinced of the advantages of supplying only low-output variants. The MC Scheu Kupfer L has an output of about 0.4 mV running at a speed of 3.54 cm/s.
