MC Kupfer L Cartridge

$2,659.00 USD

The MC Kupferl L is our classic cartridge.

Categories: ,

Description

Since 1995 we have been marketing our own styluses with ever-increasing success. Our pick-up MC Scheu Kupfer L (Low) is made at Benz Micro in Switzerland. Each pick-up is hand-made, individually measured out and audio tested. The original of the testing protocol is supplied along with the system.

 

The standard version of MC Scheu Kupfer L is based on the successful Benz Micro Glider S series. This low-output pick-up is equipped with a Namiki micro-ridge diamond stylus tip. We are convinced of the advantages of supplying only low-output variants. The MC Scheu Kupfer L has an output of about 0.4 mV running at a speed of 3.54 cm/s.

Technical Specs

Technical Specs

Physical

System type:
Moving Coil

Cantilever:
Solid boron rod: 0.28 mm diameter

Stylus:
Nude line-contact diamond, mirror polished

Stylus tip radius:
3 x 60 μm

Vertical tracking angle (VTA):
20 degrees

Coil:
Pure iron cross

Weight:
6,8 gr

 

Electrical

Output voltage:
ca. 0.4 mV @ 3.54 cm/s

Internal impedance:
ca. 12 ohms

Frequency response:
20Hz – 20kHz +/- 1 dB

Channel balance:
< 0.5dB Channel separation: > 35dB @ 1 kHz

 

Dynamic

Tracking ability:
at 315 Hz at a tracking force of 2 grams: >80 µm

Dynamic compliance:
15 µm/mN

 

Setup Instructions

Recommended loading:
100 – 47.000 Ohm

Recommended tracking force:
1.7 – 2.0 gr

Optimum tracking force:
1.7 – 1.8 gr

Recommended tonearm mass:
Medium to high

Optimum working temperature:
23° C

Break-in period:
40 hours

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MC Kupfer L Cartridge”

Your email address will not be published. Required fields are marked *