Burmester 175 Turntable

$49,000.00 USD

The turntable of the 175 record player has a sandwich construction consisting of two layers of aluminium and a further layer of brass in between.

Categories: ,

Description

After more than 35 years of experience in the processing of finest audio signals, Burmester now crowns its series of successful phono preamplifiers with a turntable. Recognizable as a typical Burmester even from the very first glance, the 175 turntable makes use of characteristic design elements of the Reference Line. The integrated signal processing derived from the Burmester 100 phono pre-amplifier processes the fine phono signals at the highest level.

 

The 175 turntable is driven by four motors located in the outer square around the sub-platter. This squaring of the circle and the use of multiple belts ensures that no irregular tension arises on the central bearing. The two-fold design of this arrangement shortens the ramp-up time and improves synchronization. This simultaneously results in an improved sound and a fast-starting time for the drive.

 

Alongside the mechanical system and the arrangement of the drive components, the control electronics, and the motors are also crucial for a great audio experience. The AC synchronous motors used are driven by digital motor electronics that perform their task with a high-precision oscillator and perfect sine and cosine voltages. The electronics are completely immune to fluctuations in the mains voltage frequency. Due to the high level of efficiency of the electronics, driver stages, and motors, the entire unit remains cool and free from heat-related impairments.

 

The Highlights:

• Digital motor electronics with a high level of efficiency

• Chassis from a massive aluminum block

• Multi-layer carbon arm tube

• Length of pick-up arm: 9 inches

• Exclusive Burmester MC pickup

• Needle: Shibata cut

• Magnetic damper in floor plate for isolation

Technical Specs

Technical Specs

Device

Weight: 60.8kg
Width: 450mm
Height (including base plate): 250mm
Depth: 395 mm
Output analogue: XLR
IP Protection category: IP20
Drive: Belt Drive
Motors: 4 synchronous motors
Turntable: Plate in CLD design Aluminium/brass/aluminium
Turntable speeds: 33 RPM, 45 RPM

Phono amplifier

Frequency response (+0 .2 dB/ -3 dB):
16 Hz – 102 kHz (Subsonic-Filter at 16 Hz)
Inherent noise at output: -71 dBV (unweighted 22.4 kHz)
Input impedances (MC): 4,7kΩ, 1,0kΩ, 470Ω, 330Ω, 220Ω, 100Ω
Distortion factor at 1 kHz / 0.5 mV: 0 .0018 %
Distortion factor at 1 kHz / 0.5 mV: 0 .0018 %
Amplification at 1 kHz: 70 dB
Channel offset: < 0 .1 dB

Tonearm

Type: Multi-layer carbon arm tube
Effective length: 238 .2 mm
Overhang: 16.2mm
Azimuth setting: via clamp screws
Weight settings: by fine thread
Tonearm weight: 0.7 kg
Effective mass: 2 .8 g

Cartridge

Type: MC
Stylus: Nude Shibata on Sapphire cantilever
Weight of the cartridge: 12g
Needle flexibility: 14 μm/mN
Internal resistor: 5 Ω
Terminal resistor: bigger 40 Ω
Recommendation 4.7 kΩ
Frequency response: at – 3 dB: 20 – 25.000 Hz
Channel offset: ≤ ±1 dB

Power supply unit

Weight: 8 .6 kg
Width: 450 mm
Height: 97mm
Depth: 316 mm
Voltage: Model 175-115: 100-120 V~ , 50 Hz/60 Hz
Model 175-230: 220-240 V~ , 50 Hz/60 Hz
Safeguards: Model 175-230: F2, F4, F6
Model 175-115: F1, F3, F4, F5, F7
F1, F2, F3: T160 mA H
F4: T1.0AH
F5, F6, F7: T200m A H
Power consumption: ON: 52W
STBY: <1W
OFF: <0 .5W
IP Protection category: IP20

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Burmester 175 Turntable”

Your email address will not be published. Required fields are marked *