Accustic Arts
Power II
$12,500.00USD
ACCUSTIC ARTS® POWER II: Audiophile integrated stereo power amplifier with included headphones amplifier.
| Inputs: | 2 x balanced high level inputs (XLR) 3 x unbalanced high level inputs (RCA/Chinch) 1 x unbalanced inputs (RCA/Chinch) as high level input or SURROUND-BYPASS (RCA) |
| Headphones output: | 1 x metal female jack 6.3 mm; >25 Ω |
| Outputs: | 1 x unbalanced pre-output (RCA); 47 Ω |
| Signal difference left/right: | < 0.4 dB (from 0 dB to -40 dB) |
| Input resistance: | balanced: 2 x 50 kΩ unbalanced: 50 kΩ |
| Total transformer power: | max. 550 VA (watts) |
| Power supply capacity: | more than 80,000 µF |
| Rated power output (at THD+N = 1.0 %): | 2 x 345 watts on 2 Ω 2 x 320 watts on 4 Ω 2 x 205 watts on 8 Ω |
| Rise time / fall time: | 4.6 µs with 4 Ω load |
| Signal to noise ratio: | -97 dBA (ref. 6.325 V) – A weighted |
| Distortion (THD+N): | < 0,015 |
| Damping factor: | > 710 |
| Power consumption: | approx. 61 watts (without load) |
| Dimensions (H x W x D) | 5.7 x 19 x 17.3 inches |
| Weight: | 50.7 lbs |
Power II Highlights
- Audiophile integrated stereo power amplifier with high output performance
- 12 selected Bipolar output transistors of highest quality
- Encapsulated 550 VA toroidal core transformer of premium quality for high output reserves; separate windings for preamp section and for power amp section
- Integrated, switchable headphones amplifier of premium quality
- Very good smoothing thanks to more than 80,000 µF power supply capacity
- High damping factor for high output reserves
- Integrated protective circuit switches ascents off when clipping, HF oscillations, too high temperature or too high DC offset occurs
- Constant low operating temperature due to generously dimensioned heat sink
- 2 x balanced high level inputs (XLR)
- 3 x unbalanced high level inputs (RCA/Chinch), can be configured as high-level input or “SURROUND-BYPASS”
- 1 x unbalanced output (RCA/Chinch), can be configured as high-level input or “SURROUND-BYPASS”
- 1 x unbalanced pre-output (RCA/Chinch), configurable as RECORD output or preamp output
- Separate level adjustment for each input
- Premium quality, gold-plated speaker terminals
- Premium quality, long-term stable relays
- Highly accurate microprocessor-controlled volume control
- Full metal housing for optimum shielding
- Front panel made of brushed aluminum; turning knobs/push buttons made of massive and chromed brass
- ACCUSTIC ARTS® remote control RC II
- ACCUSTIC ARTS® POWER II is “Handmade in Germany”
